What We Offer
-
Perma-Con®Weather-Con®
What is Weather-Con®?
FEATURES
- EXTERNAL: Suitable for outside conditions
- MODULAR CONSTRUCTION: Panels are ready to use and assemble quickly using fasteners
- QUICK ERECTION: Fast to set up on Owner-furnished concrete pad; no welding required
- STRENGTH: Designs are available that will meet the International Building Code (IBC) and site-specific seismic qualification criteria
- LIMITATIONS:
- WASHABLE: Weather-Con® does not offer inside stainless steel washable walls
-
Perma-Con®Perma-Con® EXT
What is Perma-Con® EXT?
FEATURES
- EXTERNAL: Suitable for outside conditions
- MODULAR CONSTRUCTION: Panels are ready to use and assemble quickly using fasteners
- QUICK ERECTION: Fast to set up on Owner-furnished concrete pad; no welding required
- WASHABLE: Stainless steel interior surfaces allow for easy removal of contaminants
- STRENGTH: Designs are available that will meet the International Building Code (IBC) and site-specific seismic qualification criteria
-
Perma-Con®“Classic” Perma-Con®
What is Perma-Con®?
FEATURES
- MODULAR CONSTRUCTION: Panels are ready to use and assemble quickly using fasteners
- QUICK ERECTION: Fast to set up on Owner-furnished concrete pad; no welding required
- WASHABLE: Stainless steel interior surfaces allow for easy removal of contaminants
- STRENGTH: Designs are available that will meet the International Building Code (IBC) and site-specific seismic qualification criteria
- LIMITATIONS:
- INSIDE USE: Perma-Con® is not suitable for outside conditions
- INSULATION: Not a standard option, after-market insulation options are available
-
Inline Carbon Steel Pre-filter HousingsCarbon Steel Pre-filter Housings
Inline, powder coated, carbon steel pre-filter housings accept up to four 24″ x 24″ x 2″ pre-filter elements in any combination. RPS recommends the following pre-filters: AK5206 Spark Arresting Pre-filter, AK1338 Pleated Charcoal Pre-filter, and AK64 MERV 8 Pleated Pre-filter. Nominal dimensions are 28″ L x 26-1/2″ W x 22-1/2″ H. Custom sizes and configurations are available.
Nominal dimensions are 28″ L x 26-1/2″ W x 22-1/2″ H. -
Inline HEPA Filter HousingsStainless Steel Pre-Filter Housings
Units are comprised of stainless steel inlet and outlet plenums. Please see element options below. Custom sizes and configurations are available.
Custom sizes and configurations are available. -
Inline HEPA Filter HousingsMist Eliminating Stainless Steel Pre-Filter Housings
The BF18 series of inline mist-eliminating stainless steel housings is designed to hold one 24″ x 24″ x 2” stainless steel demister element (AK5216), sold separately. Unit has a bottom-mounted valve with ¼” NPT fitting to drain off collected moisture. Can accommodate up to 2500 CFM flow. Unit will optionally hold any framed 24″ x 24″ x 2” filter element such as the AK5206 Spark Arresting Pre-filter, AK1338 Pleated Charcoal Pre-filter, or AK64 MERV 8 Pleated Pre-filter. Nominal dimensions are 27″ L x 25″ W x 27-1/2″ H. Custom sizes and configurations are available.
Nominal dimensions are 27″ L x 25″ W x 27-1/2″ H.
-
Portable Air FiltrationSP-505A Filtration Unit
The SP-505A HEPA filtration unit has the highest flow rate and static pressure rating available for a unit of its size and weight. It out-performs anything in its category and sets the standard for high quality air cleaning equipment in a small, highly-portable package. The hand truck configuration allows operation in either a horizontal or vertical position and facilitates transportation of the unit close to the work site, thereby eliminating the necessity for excessive lengths of flexible duct.
This unit has been evaluated to the applicable CSA standards for use in the United States under product Class 3812-81 (Fans and Blowers) and Canada under product Class 3812-01 (Fans and Blowers).
515CFM, Base Unit -
Molecular AdsorptionPFC(H)-500 Adsorber
The PFC(H)-500 is the most economical high efficiency adsorber available. Using nuclear grade impregnated carbon, this adsorber provides 1/4 second residence time at rated flow as per ANSI requirements. This ensures effective sorption of organic radioiodine and noble gases. The pressure drop on this unit is only 1.7″ water gage which impacts the airflow minimally. The upstream prefilter and HEPA filter protect the carbon element from dirt loading which would severely decrease efficiency and flow. Connected upstream of a HEPA filtration blower module, the system provides versatility and reduced space/cost over comparable single housing carbon/HEPA/blower units.
500 CFM HEPA/Carbon Adsorber Unit, Straight through Flow -
Alternative Shielding ProductsFloor Shields
Floor Shields are designed for large area floor shielding needs and provide both shielding and safety benefits, including:
- Designed to meet your work area shielding and stress-relief needs
- Constructed to be extremely durable
- Slip Resistant design increases worker safety
- Custom sizes and weights available
-
-
Portable Air FiltrationSP-1000LV Filtration Unit
The SP-1000 LV (Low Voltage) HEPA filtration unit is a compact, highly portable, industrial quality source of air cleaning. It goes to the job, eliminating long runs of flex ducting and the associated loss of system performance. The SP-1000 LV operates in either the vertical or horizontal position. A 1.5 HP, totally enclosed fan cooled motor gives this unit a static pressure capability of 1″ water gage at 1088 CFM. The SP-1000 LV is equipped with two 8″ Dia. inlets, each with a flow control damper. The hand truck design provides mobility and easy handling.
This unit has been evaluated to the applicable CSA standards for use in the United States under product Class 3812-81 (Fans and Blowers) and Canada under product Class 3812-01 (Fans and Blowers).
1000CFM, Base Unit, Low Voltage
Applied Engineering Controls
AEC’s Applied Engineering Controls concepts have been solving dust, contamination and toxic material control problems while improving worker safety and product quality for over 35 years.
Weekly Offer
-
Inline Carbon Steel Pre-filter Housings
Carbon Steel Pre-filter Housings
Inline, powder coated, carbon steel pre-filter housings accept up to four 24″ x 24″ x 2″ pre-filter elements in any combination. RPS recommends the following pre-filters: AK5206 Spark Arresting Pre-filter, AK1338 Pleated Charcoal Pre-filter, and AK64 MERV 8 Pleated Pre-filter. Nominal dimensions are 28″ L x 26-1/2″ W x 22-1/2″ H. Custom sizes and configurations are available.
Nominal dimensions are 28″ L x 26-1/2″ W x 22-1/2″ H. -
Inline HEPA Filter Housings
Stainless Steel Pre-Filter Housings
Units are comprised of stainless steel inlet and outlet plenums. Please see element options below. Custom sizes and configurations are available.
Custom sizes and configurations are available. -
Inline HEPA Filter Housings
Mist Eliminating Stainless Steel Pre-Filter Housings
The BF18 series of inline mist-eliminating stainless steel housings is designed to hold one 24″ x 24″ x 2” stainless steel demister element (AK5216), sold separately. Unit has a bottom-mounted valve with ¼” NPT fitting to drain off collected moisture. Can accommodate up to 2500 CFM flow. Unit will optionally hold any framed 24″ x 24″ x 2” filter element such as the AK5206 Spark Arresting Pre-filter, AK1338 Pleated Charcoal Pre-filter, or AK64 MERV 8 Pleated Pre-filter. Nominal dimensions are 27″ L x 25″ W x 27-1/2″ H. Custom sizes and configurations are available.
Nominal dimensions are 27″ L x 25″ W x 27-1/2″ H. -
Filters and Carbon AdsorbersFilter Bags
Replacement bags are non-sticking and constructed of 8-mil thick polyvinyl chloride with a yellow translucent matte finish. A ¼-inch diameter elastic shock cord is hemmed into the opening of the bag so that when stretched around the bagging flange, the bag fits securely. The bag contains (3) glove ports to facilitate easier handling of filtration during change and provides a convenient used-bag removal receptacle. Containment bags are suitable for continuous operating temperatures to 150° F (66° C).
Minimum order is Qty. 4. Delivery is 2-3 weeks ARO or less.
Replacement bags are non-sticking and constructed of 8-mil thick polyvinyl chloride. -
DuctingTwo-Ply Insulated Polyester/Neoprene Flexible Duct
Multi-purpose exhaust hose (positive pressure) for ventilation equipment, used in the temporary transfer of heated or cooled air. Hose ends are raw and unlabeled. Offers durability, flexibility and medium weight. Duct 18″ and over may be available.
Size Range (Dia.): 4″ to 24″, Standard Length: 25' (Other lengths available) -
DuctingSingle-Ply Polyester/Neoprene Flexible Duct
Multi-purpose suction or exhaust hose for ventilation equipment. Hose ends have cuffs for easy installation. Offers durability, flexibility and light weight.
Size Range (Dia.): 2″ to 20″, Standard Length: 25' (Other lengths available)
-
ShieldingCounting Cave (Shielding)
The epoxy coated, seal welded shielded cave surrounds the frisker probe to shield background radiation for on-site use. The cave has an opening 4” wide x 6 ½” high x 11” deep and 2” steel shielding on five sides. It has an angular hole in the back face of cave for the probe wire and threaded holes with removable lifting eyes for cave handling. Available with a shielded door.
The shielded cave may also be mounted on a heavy duty epoxy coated, welded structural steel mobile cart on four casters (two rigid, two swivel locking) that is easily relocated to the work site. The top of the cart supports the cave with space for the monitor and information recording. It also has two lower shelves for storage.
The probe holders are stainless steel and maintain uniform distance from probe to sample.
Currently available for:
- Ludlum Model 43-93
- Ludlum Model 43-5
- Ludlum Model 44-9
- Holders for other models available upon request
The cave has an opening 4” wide x 6 ½” high x 11” deep and 2” steel shielding on five sides. -
ShieldingMobile Shield Walls
Mobile Shield Walls are constructed of 1″ – 4″ thick lead encased in stainless steel. There are nine interlocking panels: seven panels that are 11′ 6″ tall and two panels that are 8′ 6″ tall. Each panel is equipped with a handle for moving into position and rolls on two inline wheels. The floor track is a key locking design with three direction changes and there are two top end tracks to steady the panels. The tracks are adjustable to align with the floor.
-
ShieldingLead Wool Blanket Rack
- Engineered to carry up to 2,160 pounds of lead wool blankets (6 layers of 1′ x 6′ blankets at 15 lbs./sq. ft.).
- Rigid casters on one end, swivel casters with brakes on the opposite end.
- Interlocks with additional racks for use as a shield wall.
- When two or more racks are used, blankets can span from one rack to the next, minimizing streaming between the sections.
- Epoxy-coated.
- Standard size: 48″ wide x 80″ high (nominal).
- Other sizes available upon request.
-
Frisking BoothsStandard Booth
The Standard Frisking Booth is constructed of 1/4″ – 3″ thick lead sheet panels encased in epoxy painted carbon steel. Cable penetrations are fitted with caps to prevent streaming. The booth can be shipped as an assembled unit, or disassembled for assembly on-site.
-
Frisking BoothsShielded Booth
The Shielded Frisking Booth is a welded one piece construction. It is also available in lead (1/4″- 2″ thick) encased carbon steel painted with epoxy. The panels are cap screwed into the deck as well as bolted together, and the ramps move up and down. The roof is optional. The booth is movable by both forklift and crane, and comes pre-assembled or on pallets for assembly on-site.
-
Frisking BoothsPCM Shielded Booth
The PCM Shielded Frisking Booth is a welded one piece, epoxy coated, carbon steel construction with internal shield walls on either side of the entrance that pivot to allow for maintenance. The booth is primed and painted and has a 3′ wide x 3’ 6” x 7’ high shielded area with a shielding thicknesses of ½ to 3” steel. It features a 304 stainless steel shelf for a portable monitor and service ports as required (not pictured). The booth has a 115vac receptacle and a single point electrical connection (not pictured). It also has a light with a light switch (not pictured). The booth is movable by both forklift and crane.
-
Perma-Con®
Weather-Con®
What is Weather-Con®?
FEATURES
- EXTERNAL: Suitable for outside conditions
- MODULAR CONSTRUCTION: Panels are ready to use and assemble quickly using fasteners
- QUICK ERECTION: Fast to set up on Owner-furnished concrete pad; no welding required
- STRENGTH: Designs are available that will meet the International Building Code (IBC) and site-specific seismic qualification criteria
- LIMITATIONS:
- WASHABLE: Weather-Con® does not offer inside stainless steel washable walls
-
Perma-Con®
Perma-Con® EXT
What is Perma-Con® EXT?
FEATURES
- EXTERNAL: Suitable for outside conditions
- MODULAR CONSTRUCTION: Panels are ready to use and assemble quickly using fasteners
- QUICK ERECTION: Fast to set up on Owner-furnished concrete pad; no welding required
- WASHABLE: Stainless steel interior surfaces allow for easy removal of contaminants
- STRENGTH: Designs are available that will meet the International Building Code (IBC) and site-specific seismic qualification criteria
-
Perma-Con®
“Classic” Perma-Con®
What is Perma-Con®?
FEATURES
- MODULAR CONSTRUCTION: Panels are ready to use and assemble quickly using fasteners
- QUICK ERECTION: Fast to set up on Owner-furnished concrete pad; no welding required
- WASHABLE: Stainless steel interior surfaces allow for easy removal of contaminants
- STRENGTH: Designs are available that will meet the International Building Code (IBC) and site-specific seismic qualification criteria
- LIMITATIONS:
- INSIDE USE: Perma-Con® is not suitable for outside conditions
- INSULATION: Not a standard option, after-market insulation options are available
-
ContainmentLI-360A Dual Chamber Tent
Dual Chamber Tent
- 8′ wide x 15′ long x 7′ high overall dimensions
- 8′ wide x 12′ long work chamber
- 8′ wide 3′ long ante room changing area
- One vent filter screen per chamber
- Set of two 3″ dia service sleeves & one 8″ dia service sleeves on opposite walls
8′ wide x 15′ long x 7′ high overall dimensions -
ContainmentLI-363 Dual Chamber Tent
Dual Chamber Tent
- 10′ wide x 9′ long x 7′ high overall dimensions
- 10′ wide x 5′ long work chamber
- 10′ wide 4′ long ante room changing area
- One vent filter screen per chamber
- Two 24″ dia drum sleeves for direct attachment to waste drums
- Set of two 3″ dia service sleeves & one 8″ dia service sleeve on opposite walls
10′ wide x 9′ long x 7′ high overall dimensions
Blog News
Media: Twitter Embeds
Really cool to read through and find so much awesomeness added to [...]
Template: Comments
This post tests comments in the following ways. Threaded comments up [...]
Markup: Text Alignment
One more thing that could help you to start to live green is to begin [...]
Markup: Image Alignment
One more thing that could help you to start to live green is to begin [...]
Markup: HTML Tags and Formatting
One more thing that could help you to start to live green is to begin [...]
